Expo 2020 - Dubai, UAE
scroll to down

BreadCrumb-en

guarantee image

OpenVox D410 is the worldwide affordable quad ports T1/E1/J1 card and delivers the great voice quality over telephony systems. It supports up to 120 voice calls or 8.192 Mbps of fullduplex data throughput over four T1, E1, or J1 lines. DE410 takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 in all 4 ports.

  • Four T1/E1/J1 ports with PCI-Express interface for high performance voice and data applications
  • Octasic® Hardware Echo Cancellation Module Available
  • Up to 120 Simultaneous voice calls

OpenVox D410 supports E1, T1 and J1 environments. It is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipments and allows inexpensive T1 channel banks to connect with E1 circuits.
The DE410 offers an on-board Octasic® DSP-based echo cancellation module.The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls.
D410 supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.
D410 works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

OpenVox Elastix&trixbox certified
Target Applications:

  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • "Meet-Me" Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways (support SIP, H.323, and IAX)
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • PRI/Switch Compatibility - Network or CPE

Specifications

  • Four T1/E1/J1 ports with PCI-Express interface for high performance voice and data applications
  • Half-length PRI card
  • RJ48 connector
  • Power: 2.83W Maximum
  • Operation temperature: 0°C to 50°C
  • Storage temperature: -65°C to 125°C
  • Dimension: 12.9cm*11.1cm*2cm
  • Weight: 129g

Optional Octasic® DSP Echo Cancellation Module--EC100-128:

  •     128ms tail/channel (on all channel densities)
  •     Octasic® Music Protection
  •     Adaptive Noise Reduction
  •     Automatic Level Control (G.169)
  •     Field upgradeable algorithm
  •     V.25 / V.8 answer tone (w/ and w/o phase reversal)
  •     DTMF as per Q.24
  •     No CPU load as a result of echo cancellation.
  •     Does not increase the physical size of the card, and no additional slot is required
  •     EC100-128 power: 0.33W/3.5W
  •     Storage temperature: -40°C to 75°C
  •     PRI Switch Compatibility
  •     EuroISDN (PRI or PRA) - Q.931/Q.921
  •     Network or CPE
  •     AT&T 4ESS
  •     National ISDN 2
  •     CAS Voice Modes
  •     DMS 100
  •     Lucent 5E
  • Operating Systems: Linux (all versions, releases and distributions from 1.0 up)

Minimum Hardware Requirement:

  •     800-Mhz Pentium III
  •     128MB RAM
  •     Available PCI/PCI Express Slot

Contact us:

Address: Office 109B, Dubai Tower
Baniyas Sq., Deira, Dubai, UAE.
Telephone:  +971 4 2277586
Mobile:  +971 50 7439079
(whatsapp) +971 55 4886092
All rights reserved for SENA Co.
scroll to top