Expo 2020 - Dubai, UAE
scroll to down
guarantee image

OpenVox A2410 is an analog card witch can be used for connecting analog telephones and analog POTS lines through a PC. It delivers the superior voice quality on both FXO and FXS interfaces in all 24 ports. AE2410 takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality on both FXO and FXS interfaces in all 24 ports.
Adjustable Interrupt Routing Design
Interrupts frequency adjustment
Up to 24 Simultaneous PSTN Calls (Per PCI Slot)
Compatible with All Commercially Available Motherboards
Octasic® Hardware Echo Cancellation Module Available

A2410 is an analog card with interchangeable quad-FXS and quad-FXO modules. It can eliminate the requirement for separate channel banks or access gateways.
The A2410 contains 6 module banks. Each bank supports one analog interface. The module banks may be filled with up to 6 quad-FXO or quad-FXS modules enabling the creation of any combination of ports. Scaling of an analog card solution is accomplished by simply adding additional cards.
AE2410 is a new generation analog card with Octasic® Hardware Echo Cancellation Module on board. With the interchangeable quad-FXS and quad-FXO modules, AE2410 can eliminate the requirement for separate channel banks or access gateways.
Once the Octasic® DSP module EC2032 is added to the AE2410, please make sure you are ready to say goodbye to the poor voice quality and echo echo echo in your phone system. No one will even get a chance to hear that any more! The AE2410 with Octasic DSP module will support Telco-grade hardware echo cancellation on all channels, up to the card’s maximum configuration in 24 ports with no additional CPU load.
A2410 works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

OpenVox Elastix&trixbox certified
Target Applications

  • Channel Bank Replacement / Alternative
  • Small Office Home Office (SOHO) applications
  • Small and Medium Business (SMB) applications
  • Gateway Termination to analog telephones/lines

Specifications

  • Up to 24 ports through a combination of FXS400 and FXO400 modules
  • Full-length analog card
  • Up to 6 quad FXS or FXO modules
  • RJ45 connector
  • 32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible with all commercially available motherboards, and proper sharing of PCI interrupts
  • 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
  • Autosense compatibility with 5 V and 3.3 V PCI busses compatible
  • FPGA design, upgradeable firmware onsite
  • Power: 8.21W Minimum, 88.24W Maximum at 3.3 V or 5 V.
  • Operation temperature: 0°C to 50 °C
  • Storage temperature: -40°C to 125°C
  • Size: 31.1*9.8*1.8cm
  • Weight: 175g

Optional Octasic® DSP Echo Cancellation Module — EC2032

  •     1024 taps/128 ms tail/channel (on all channel densities)
  •     Octasic® music protection
  •     Automatic level control (G.169)
  •     Field upgradeable algorithm
  •     V.25 / V.8 answer tone
  •     DTMF as per Q.24
  •     No CPU load as a result of echo cancellation.
  •     Does not increase the physical size of the card, and no additional slot is required
  •     EC2032 (SMEC V1.1) power: 3.83W
  • Operating Systems: Linux (all versions, releases and distributions from 1.0 up)

Minimum Hardware Requirement:

  •     800-Mhz Pentium III
  •     128MB RAM
  •     Available PCI/PCI Express Slot

Features

Caller ID and Call Waiting Caller ID
ADSI Telephones
Loopstart Signaling Support

Contact us:

Mobile:  +971 54 4551689
All rights reserved for SENA Co.
scroll to top